2026 Brillion 930E-45-12 

2026 Brillion 930E-45-12

MAXIMIZE PAYLOAD AND PROFITABILITY
The 930E Traveling Tail is part of the 900 E-Series trailers. The tail is capable of lifting 24,000 lbs up to 53″ dock height. Maximize your loads by utilizing the entire deck and maximize your payload by having the undercarriage five feet behind the main hinge. The longer wheelbase gives you proper weight distribution between tractor and trailer and fully supports the tail.

The traveling tail concept allows for stable dock loading and increases your payload by having a longer wheelbase.

WHY OWN A 900 E-SERIES
Quick, simple, safe operation and a longer wheelbase that increases payload. A 15′ tail reduces the load angle to a low 11°. Frames are steel shot blasted in preparation for the TGIC polyester powder coat paint finish standard on 900 E-Series trailers. The tail can raise and lift 24,000 lbs up to 57″ dock height. The 900 E-Series trailers are backed by a 5-year structural warranty.

WORK WITH EASE
The low-load tail angle ensures easy clearance for loading low-sitting equipment, providing seamless loading capabilities. The hydraulic control allows for efficient and convenient loading and unloading operations, all managed through a single control point.

Features May Include

• Capacity*    35 Ton (70,000 lbs.)
• Deck Rating    50,000 lbs. in 10′
• Estimated Base Weight    16,300 lbs. (48′) +/-3%
• Main Frame    Fabricated 80,000 PSI Yield 4-Beam Design
• Crossmembers    4″ Junior I-Beam and 3″ Junior I-Beam on 8″ Centers
• Slope Drop    90°
• Parking Stands    Jost Two Speed Landing Gear
• Pin Setting    18″
• Swing Clearance    84″
• Hitch    Fifth-Wheel Kingpin
• Deck Width    102″
• Loaded Deck Height    38″
• Loaded Ground Clearance    20″
• Decking    1-3/8″ Nominal Apitong (Lower Deck)
• Tool Box    Twin Upper Deck Mounted Top-Opening with Non-Weight Bearing Lid Illuminated
• Tie Downs    Double Key Hole Chain Slot / Gotchas on 16″ Centers / (6) Double Keyhole Chain Slots on Tail / (2) D-Rings Lower Slope at Deck
• Tail Lifting Capacity    24,000 lbs.
• Load Angle    11° with 15′ Tail
• Features    Automatic Slack Adjusters, Flat Approach Plate, Apitong Wood Covered Tail, Center Deck Keyholes on Tail, Bolt-On Traction Plate Over Approach Plate
• * Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations.
• 6′ x 102″ Upper Deck Ramp (Air operated) (10,000 lbs. capacity) (11.5° load angle)
• SUSPENSION & UNDERCARRIAGE
• Suspension    Neway Air Ride RLU228, 22,500 lbs. Capacity with Manual Dump Valve
• Undercarriage    Centralized Grease System
• Axles    (2) 25,000 lbs. Axles, Dual Tire, Oil Bath Bearings, Outboard Brake Drum, Automatic Slack Adjusters
• Axles Prepped for Air Inflation
• Brakes    12.25 x 7.5 Full Air / Spring Brakes ABS, 4S2M
• Tires    235/75R 17.5 LRJ Double Coin
• Rims    17.5 x 6.75 Tubeless
• Wheels    Steel Hub Pilot
• Oil Seal Hubs    Internal Mated Assembly
• Hydraulic Hook Up    Quick Couplers / 2,500 PSI – 20 GPM at Controls, 50 GPM Max
• Hydraulic Winch    Upper Deck 12,000 lbs. Worm Gear with 85′ of 1/2″ Cable with Wear Plate
• Hydraulic Valve Body    Rexroth
• Air / Electrical    7 Way Receptacle
• Lights    Grote MicroNova LED Clear Lens-Enhanced Stop, Tail & Turn; Rear Amber Strobe (10-year warranty)
• Wiring Harness    Grote “Xtreme” Wiring Harness (7-year warranty)
• Finish    Steel Grit Shot Blast to Bright Metal
• Color    Zinc Rich Primer
• Powder Coat Color    White, Black, Yellow, Blue, Red, Green, Metallic Gray, Sapphire Blue
• Decals    Hi-Visibility Reflective Package